Toimitetaan Euroopan varastostamme - ei lisäveroja tai tulleja
Inkjecta Flite X1 Wireless / Battery-Driven Tattoo Machine - Troopa
Ei varastossa
- Add To Wish List
- Luo uusi toivelista
The Inkjecta Flite X1 in Troopa removes cables and power supplies from your setup entirely, giving you full wireless freedom at the chair. Designed and built in Australia with dual nanotechnology motors, this battery-driven machine puts voltage and needle depth controls directly on the housing for mid-session adjustments. It's purpose-built for professional tattoo artists who want cable-free precision and full onboard control.
Kuvaus
The Inkjecta Flite X1 in Troopa removes cables and power supplies from your setup entirely, giving you full wireless freedom at the chair. Designed and built in Australia with dual nanotechnology motors, this battery-driven machine puts voltage and needle depth controls directly on the housing for mid-session adjustments. It's purpose-built for professional tattoo artists who want cable-free precision and full onboard control.
Voltage is set by holding a single button and tilting the machine left or right across a 4.5 V - 16.5 V range, with live output displayed on the body. Needle depth covers 0 mm to 4.5 mm through two arrow buttons on the front of the housing, removing the need for adjustable grips.
Two Li-Ion batteries ship in the box. The large 2040 mAh 18500 cell delivers up to 8 hours of continuous use and recharges in 90 minutes, while the smaller 900 mAh 18350 cell provides up to 4 hours with a 40-minute charge time. Three needle bars are also included - carbon rigid (pre-assembled), medium torsion, and hard torsion - letting you match needle hardness to your technique. The Flite X1 is fully compatible with all Inkjecta Flite Nano cams and needle bars, and works with any cartridge grip in backstem or screw-on format.
Key Features
- Weight: 110 g (no battery) / 144 g (large battery) / 139 g (small battery)
- Motor: Dual nanotechnology motors
- Operating Voltage: 4.5 V
- 16.5 V (single-button tilt-to-adjust, patent pending)
- Needle Depth: 0 mm
- 4.5 mm (digital onboard adjustment, patent pending)
- Default Stroke: 3.25 mm cam included; optional cams available in 2.5 mm, 3.0 mm, 3.5 mm, and 4.0 mm
- LED Display: 12-LED ring for machine output and battery level readout
- PCB: Manufactured in Australia to military standards
- In the Box: 2-port smart studio charger, two Li-Ion batteries with spacer, carbon rigid bar, medium and hard torsion bars, Inox MX5 lubricant, SuperLube, magnetic key tools, disposable grip, hard protective carry case, and hard-cover manual
Toimitus
Kaikki arkipäivisin, ennen kello 16:00 tulleet tilaukset käsitellään ja lähetetään samana päivänä. Rahdin hinta vaihtelee tilattavan paketin koosta ja painosta riippuen. Hinnat alk. 9,95€ UPS n seuraavan päivän toimitus.
Takuu
Klikkaa tästä nähdäksesi palautustiedot.